Periodic Check
Titan watches are designed to provide accurate and reliable service. However, every two to three years, or when you replace the battery, you should visit a Titan watch care centre or Authorized Service Center. They will inspect your watch for any worn parts that may need replacement, check whether it needs lubrication, and whether perspiration, water, dust, etc. entered the watch & do the needful to restore the watch. Titan Automatic watches need to be serviced once in 2-3 years.
Non water-resistant watch
Non water-resistant watch - If your watch is not water resistant, be careful not to get water on the case. The case should be wiped gently with a slightly moistened soft cloth and then dried carefully.
Polishing the case/glass-When you want to polish the case of your watch, use a soft and slightly damp cloth .Please do not use any solvents, cleaners, or detergents as this may harm the watch.
When you take off your watch, leave it in a well-ventilated spot. Never put it in a sealed container when it is still damp with perspiration.
Your watch is a precision measuring instrument. Treat it carefully, and it will serve you well. Avoid undue shocks (such as dropping on hard surfaces).
If your watch is stored at temperatures outside the normal range (as low as 5°C or as high as +50°C) the electronic components may cease to function.
You should aim to protect your watch from heavy perspiration. Please remember to wipe it dry as soon as possible.
Avoid placing your watch near loudspeakers, refrigerator door magnets, electric mixers and blenders, headphones and other electrical equipment. These have strong magnetism that affect the timekeeping and functioning of your watch.
Do not try to change the time setting of your watch between 22.00 and 02.00 hours because the calendar mechanism will be in the process of changing the day and date and any manual intervention will cause damage to the mechanism.
Chemical substances, gases, mercury, etc., may change the colour of cases, bracelets and straps. Mercury (for instance, from a broken thermometer) can cause particularly unsightly grey discoloration of gold plating.
Leather strap should be slightly loosened in the summer, when it may absorb perspiration. A tight strap not only prevents the passage of air over the strap undersurface but can also cause a perspiration rash on the wrist. If the strap ever becomes wet with perspiration, wipe it dry with a soft cloth. Avoid leaving your watch in direct sunlight. The strap color may fade.
Metal bracelet should be cleaned carefully in water when dirty, using a soft toothbrush with soap and water to remove dirt. Rinse with water and dry carefully with a soft cloth.
  • What are the benefits of using genuine spares?
    1. Usage of original Titan spare parts is recommended. Use of non-genuine spares will render your watch's warranty as null & void.
    2. Use of non-genuine spares may damage your watch.
  • Do any of the straps cause any allergy?
    No, all Titan watch straps—metal, plastic or leather—are anti-allergic.
  • Can scratches on the dial's surface be removed through buffing?
    No, the mineral glass is hardened & it is not possible to remove the scratches through buffing. You can replace the glass on a chargeable basis.
  • What is gold plating?
    It is a thin gold layer plated on the surface of the case or strap to give a good lustre & smooth finish to the watch.
  • Where can I obtain spare parts for my watch?
    Titan authorized service centres provide services for your watch, including battery and spare parts replacement.
find a titan store near you